AOZ5317NQI-04 Datasheet | Alpha & Omega Semiconductors

AOZ5317NQI-04 High-Current, High-Performance Dr MOS Power Module General Description The AOZ5317NQI-04 is a high efficiency synchronous buck power stage module consisting of two asymmetrical MOSFETs and an integrated driver. The MOSFETs are individually optimized for operation in the synchronous buck configuration. The High-Side MOSFET is optimized to achieve low capacitance and gate charge for fast switching with low duty cycle operation. The Low-Side MOSFET has ultra low ON resistance to minimize conduction loss. The AOZ5317NQI-04 uses a PWM input for accurate control of the power MOSFETs switching activities, is patible with 3 V and 5 V (CMOS) logic and supports Tri-State PWM. Features - 2.5 V to 25 V power supply range - 4.5 V to 5.5 V driver supply range - 60 A continuous output current - Up to 80 A for 10 ms on pulse - Up to 120 A for 10 µs on pulse - Up to 2 MHz switching operation - 3 V / 5 V PWM / Tri-State input patible - Under-Voltage lockout protection - SMOD# control for Diode Emulation / CCM operation - Low Profile 5x5 QFN-31L package A number of Features are provided making the AOZ5317NQI-04 a highly versatile power module. The bootstrap switch is integrated in the driver. The Low-Side MOSFET can be driven into diode emulation mode to provide asynchronous operation and improve light-load performance. The pin-out is also optimized for low parasitics, keeping their effects to a minimum. Applications - Memory and graphic cards - VRMs for motherboards - Point of load DC/DC converters - Video gaming consoles Typical Application PWM Controller THWN DISB# SMOD# PWM Driver Logic and Delay AGND CVCC 5V VIN BOOT HS Driver LS...